Truck Remodel - Wiring.

Main Switch Panel

Circuits : 

Battery Power Source 24 Volt

Lights - 12 volt

Electronics - Pis and Nixie clock 13.8 Volt to battery / UPS

Pumps

Fridges

Forgot about  the Diesel Heater. 

 

 

Experimenting with Magnet links ..

 John Finnimore .. 

What Is My IP?

My Public IPv4:

143.244.41.160

My Public IPv6:

Not Detected

My IP Location:

Amsterdam, NH NL

Problem Accessing Telstra Router Via My Router .. FIXED - Saved Config.

Reset TL-MR3420 to Factory Defaults

1. Perform a factory reset on the TL-MR3420.
2. Reconfigure the TL-MR3420 from scratch:
   • Set a unique IP address.
   • Disable DHCP.
   • Configure WDS for bridging.
3. Save the settings and reboot.

Option 3: Set a Static IP on Your Computer

1. Assign a static IP to your computer to avoid conflicts with the TL-MR3420.
2. Access the TL-MR3420’s admin interface and change its IP address.
3. Revert your computer’s IP settings to DHCP.

Next Steps:

1. Choose one of the options to resolve the IP conflict.
2. Follow the steps based on the chosen option to configure the TL-MR3420 correctly.
3. Verify that the TL-MR3420 connects to TelstraBB47D9 and provides internet access through Ethernet.

 

5. Disable DHCP on TL-MR3420

    Go to Network Settings > LAN Settings on the TL-MR3420.
    Change the IP address of the TL-MR3420 to a free IP within your main router's range (e.g., 192.168.0.2 if it’s not taken).
    Disable the DHCP server on the TL-MR3420. This will ensure that the main router handles all IP assignments.

6. Save and Reboot the Router

    Save the settings and reboot the TL-MR3420 router.

7. Test the Connection

    Once the TL-MR3420 reboots, it should be connected to your Wi-Fi network (TelstraBB47D9).
    Your computer, connected via ethernet to the TL-MR3420, should now be able to access the internet through this router.

Explanation:

    By enabling WDS, the TL-MR3420 will connect wirelessly to your Telstra Wi-Fi network and act as a bridge.
    Disabling DHCP on the TL-MR3420 allows the main Telstra router to handle IP assignments, meaning devices connected to the TL-MR3420 will be part of the same network as those connected directly to the Telstra Wi-Fi.

This setup will allow your computer, connected to the TL-MR3420 via ethernet, to access the internet through the Wi-Fi network, just like if it were connected wirelessly.

Smart Switch TYWB 4CH 7-32V RF

 Tuya Smart has an app for iPhone.

Set up an account.

 

Device QR XQDD-01700B41

Wont work fails traceroute on 192.168.0.1

Still to resolve issue of Telstra and Router on same IP .. need to swith router to xx.0.2

Tried again and it worked 

https://www.manualslib.com › manual › 3445860 › Flexradio-Mhcozy-Tywb-4ch.html
FLEXRADIO MHCOZY TYWB 4CH MANUAL Pdf Download | ManualsLib

Try to get Google Home to work. Install App on iPhone. 

IFTTT

https://pimylifeup.com/using-ifttt-with-the-raspberry-pi/