My ESP 32 based node on the Front Driver's side blew up when I hooked up a light to it and the light had an intermittant short. The ESP 32 just turns all the relays on. I am using it manually ATM.
Either the program is corrupted or the ESP 32 bricked. Either way amounts to much the same thing.
I also built a second controller to take care of the lights on the LHS of the truck.
I have also to install Arduino IDE on my NUC and get that running.
Everytime I do this I forget the steps involved.
Arduino IDE 2.0 Installation notes.
https://www.youtube.com/watch?v=pLrKYRsJ3Eo
https://github.com/TheAssassin/AppImageLauncher/releases
Error compiling "blink"
How to Solve Python ModuleNotFoundError: no module named ‘serial’
https://www.pythonreader.com/2022/08/itsmycode-modulenotfounderror-no-module_76.html
All 4 ESP32 upoaded the sketch, so the ESP 32 based node on the Front Driver's side was not "bricked" but the compiled sketch was corrupted.
I cant find the sketch anywhere so will probably have to rewrite it. :-(
No comments:
Post a Comment